This is the latest recevied telemetry packets stored in our database for station/object SP6TKN-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1767215848 | 254 | 7 | 130 | 0 | 0 |
| 1767215415 | 249 | 6 | 230 | 0 | 0 |
| 1767215199 | 246 | 6 | 285 | 0 | 0 |
| 1767215004 | 243 | 6 | 330 | 0 | 0 |
| 1767214814 | 240 | 6 | 386 | 0 | 0 |
| 1767214623 | 236 | 6 | 453 | 0 | 0 |
| 1767214433 | 235 | 5 | 502 | 0 | 0 |
| 1767214243 | 232 | 5 | 570 | 0 | 0 |
| 1767214052 | 230 | 6 | 639 | 0 | 0 |
| 1767213862 | 228 | 6 | 723 | 0 | 0 |
| 1767213672 | 227 | 6 | 807 | 0 | 0 |
| 1767213481 | 226 | 6 | 884 | 0 | 0 |
| 1767213291 | 227 | 6 | 975 | 0 | 0 |
| 1767213101 | 224 | 6 | 1056 | 0 | 0 |
| 1767212910 | 226 | 6 | 1156 | 0 | 0 |
| 1767212720 | 227 | 7 | 1248 | 0 | 0 |
| 1767212529 | 228 | 7 | 1360 | 0 | 0 |
| 1767212339 | 226 | 7 | 1488 | 0 | 0 |
| 1767212148 | 228 | 7 | 1626 | 0 | 0 |
| 1767211957 | 228 | 7 | 1809 | 0 | 0 |
| 1767211766 | 229 | 7 | 1996 | 0 | 0 |
| 1767211575 | 230 | 6 | 2264 | 0 | 0 |
| 1767211383 | 237 | 6 | 2268 | 0 | 0 |
| 1767211192 | 233 | 7 | 2211 | 0 | 0 |
| 1767211001 | 234 | 8 | 2140 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)