This is the latest recevied telemetry packets stored in our database for station/object SP6ZHP-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1767215807 | 254 | 7 | 140 | 0 | 0 |
| 1767215589 | 250 | 7 | 188 | 0 | 0 |
| 1767215372 | 246 | 6 | 237 | 0 | 0 |
| 1767215156 | 245 | 6 | 293 | 0 | 0 |
| 1767214966 | 241 | 6 | 337 | 0 | 0 |
| 1767214775 | 239 | 6 | 398 | 0 | 0 |
| 1767214585 | 237 | 6 | 461 | 0 | 0 |
| 1767214395 | 234 | 5 | 511 | 0 | 0 |
| 1767214204 | 232 | 5 | 580 | 0 | 0 |
| 1767214014 | 229 | 6 | 660 | 0 | 0 |
| 1767213824 | 228 | 6 | 741 | 0 | 0 |
| 1767213634 | 226 | 6 | 824 | 0 | 0 |
| 1767213443 | 226 | 6 | 903 | 0 | 0 |
| 1767213253 | 225 | 6 | 985 | 0 | 0 |
| 1767213062 | 227 | 6 | 1074 | 0 | 0 |
| 1767212872 | 224 | 6 | 1165 | 0 | 0 |
| 1767212682 | 230 | 7 | 1258 | 0 | 0 |
| 1767212491 | 228 | 7 | 1374 | 0 | 0 |
| 1767212301 | 229 | 5 | 1518 | 0 | 0 |
| 1767212110 | 229 | 7 | 1656 | 0 | 0 |
| 1767211919 | 229 | 6 | 1843 | 0 | 0 |
| 1767211727 | 231 | 6 | 2048 | 0 | 0 |
| 1767211535 | 230 | 0 | 2314 | 0 | 0 |
| 1767211344 | 233 | 7 | 2251 | 0 | 0 |
| 1767211154 | 234 | 6 | 2201 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)