This is the latest recevied telemetry packets stored in our database for station/object CE3SUR-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1765329270 | 12 | 863 C | 415 V | 51 M | 0 |
| 1765326268 | 12 | 878 C | 415 V | 51 M | 0 |
| 1765323561 | 12 | 914 C | 415 V | 50 M | 0 |
| 1765323356 | 12 | 912 C | 415 V | 50 M | 0 |
| 1765323103 | 12 | 913 C | 414 V | 49 M | 0 |
| 1765321371 | 12 | 910 C | 415 V | 50 M | 0 |
| 1765318371 | 12 | 928 C | 414 V | 51 M | 0 |
| 1765315371 | 12 | 928 C | 415 V | 49 M | 0 |
| 1765312371 | 12 | 919 C | 415 V | 50 M | 0 |
| 1765309371 | 12 | 905 C | 414 V | 50 M | 0 |
| 1765306944 | 12 | 910 C | 414 V | 49 M | 0 |
| 1765306703 | 12 | 905 C | 414 V | 50 M | 0 |
| 1765305831 | 12 | 893 C | 415 V | 52 M | 0 |
| 1765302830 | 12 | 890 C | 414 V | 51 M | 0 |
| 1765302383 | 12 | 897 C | 415 V | 51 M | 0 |
| 1765302229 | 12 | 893 C | 415 V | 49 M | 0 |
| 1765302006 | 12 | 884 C | 414 V | 50 M | 0 |
| 1765299228 | 12 | 872 C | 414 V | 50 M | 0 |
| 1765296228 | 12 | 857 C | 415 V | 50 M | 0 |
| 1765293228 | 12 | 837 C | 415 V | 52 M | 0 |
| 1765290228 | 12 | 815 C | 415 V | 53 M | 0 |
| 1765287228 | 12 | 793 C | 415 V | 51 M | 0 |
| 1765284228 | 12 | 771 C | 415 V | 51 M | 0 |
| 1765283142 | 12 | 774 C | 414 V | 50 M | 0 |
| 1765282928 | 12 | 770 C | 415 V | 50 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 1, 0
Volt: 0, 1, 0
Alt: 0, 1, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)