This is the latest recevied telemetry packets stored in our database for station/object MW1HAX-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1767023613 | 554 C | 5852 % | 8248 hPa | 0 | 0 |
| 1767023081 | 558 C | 5734 % | 8230 hPa | 0 | 0 |
| 1767020540 | 574 C | 5931 % | 8248 hPa | 0 | 0 |
| 1767019728 | 578 C | 5964 % | 8246 hPa | 0 | 0 |
| 1767017847 | 566 C | 6468 % | 8241 hPa | 0 | 0 |
| 1767017326 | 562 C | 6067 % | 8237 hPa | 0 | 0 |
| 1767016877 | 563 C | 6028 % | 8238 hPa | 0 | 0 |
| 1767016348 | 561 C | 6389 % | 8243 hPa | 0 | 0 |
| 1767015755 | 553 C | 6129 % | 8243 hPa | 0 | 0 |
| 1767015241 | 550 C | 6082 % | 8236 hPa | 0 | 0 |
| 1767014693 | 549 C | 5997 % | 8234 hPa | 0 | 0 |
| 1767014019 | 548 C | 6046 % | 8246 hPa | 0 | 0 |
| 1767011336 | 544 C | 6055 % | 8249 hPa | 0 | 0 |
| 1767010116 | 542 C | 6105 % | 8242 hPa | 0 | 0 |
| 1767009514 | 541 C | 6070 % | 8243 hPa | 0 | 0 |
| 1767009113 | 542 C | 6009 % | 8227 hPa | 0 | 0 |
| 1767008453 | 542 C | 5868 % | 8239 hPa | 0 | 0 |
| 1767007710 | 545 C | 5700 % | 8249 hPa | 0 | 0 |
| 1767004509 | 565 C | 5453 % | 8256 hPa | 0 | 0 |
| 1767003730 | 568 C | 5497 % | 8253 hPa | 0 | 0 |
| 1767003026 | 570 C | 5531 % | 8253 hPa | 0 | 0 |
| 1767001786 | 569 C | 5489 % | 8255 hPa | 0 | 0 |
| 1767001160 | 587 C | 5339 % | 7847 hPa | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)