K0FTT Automobiles

My position About ☰

reset

HS4IOO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS4IOO. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	BAR*	BAT*
1765355489	33.38 °C	35.1 %RH	1003 hPa	4.16 V
1765354889	33.04 °C	35.2 %RH	1003 hPa	4.17 V
1765354289	33.04 °C	35.3 %RH	1003 hPa	4.17 V
1765353689	33.13 °C	35.2 %RH	1003.2 hPa	4.1 V
1765353089	33.91 °C	34.2 %RH	1003.2 hPa	4.1 V
1765352490	33.56 °C	34.5 %RH	1003.2 hPa	4.12 V
1765351889	33.09 °C	34.8 %RH	1003.3 hPa	4.13 V
1765351289	33.75 °C	34.1 %RH	1003.5 hPa	4.18 V
1765350689	33.2 °C	35 %RH	1003.6 hPa	4.18 V
1765350089	33.65 °C	34.6 %RH	1003.7 hPa	4.19 V
1765349489	33.13 °C	34.7 %RH	1003.9 hPa	4.18 V
1765348889	33.9 °C	34.2 %RH	1004.1 hPa	4.17 V
1765348289	33.79 °C	34.9 %RH	1004.4 hPa	4.18 V
1765347689	33.81 °C	34.8 %RH	1004.6 hPa	4.17 V
1765347089	33.41 °C	35.6 %RH	1004.8 hPa	4.18 V
1765346489	32.84 °C	36.3 %RH	1005.1 hPa	4.1 V
1765345889	33.02 °C	35.5 %RH	1005.3 hPa	4.11 V
1765345289	33.02 °C	36.7 %RH	1005.4 hPa	4.12 V
1765344689	32.77 °C	37.2 %RH	1005.6 hPa	4.14 V
1765344089	33.59 °C	36.1 %RH	1005.8 hPa	4.18 V
1765343489	33.13 °C	36.5 %RH	1006 hPa	4.18 V
1765342889	32.06 °C	37.7 %RH	1006.2 hPa	4.18 V
1765342289	32.58 °C	38 %RH	1006.4 hPa	4.18 V
1765341689	32.54 °C	38.2 %RH	1006.6 hPa	4.18 V
1765341089	32.4 °C	38.2 %RH	1006.7 hPa	4.18 V

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

BAR: 0, 0.1, 800

BAT: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)