This is the latest recevied telemetry packets stored in our database for station/object F4HMY-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1766786879 | 765 | 4419 | 8239 | 0 | 0 |
| 1766785455 | 764 | 4438 | 0 | 0 | 0 |
| 1766784916 | 764 | 4452 | 8270 | 0 | 0 |
| 1766783707 | 763 | 4473 | 8238 | 0 | 0 |
| 1766782727 | 761 | 4535 | 7853 | 0 | 0 |
| 1766782238 | 761 | 4484 | 8271 | 0 | 0 |
| 1766781655 | 760 | 4516 | 8257 | 0 | 0 |
| 1766781277 | 759 | 4532 | 8252 | 0 | 0 |
| 1766780729 | 758 | 4551 | 8266 | 0 | 0 |
| 1766780303 | 757 | 4568 | 8263 | 0 | 0 |
| 1766779722 | 757 | 4569 | 8258 | 0 | 0 |
| 1766779048 | 758 | 4462 | 0 | 0 | 0 |
| 1766778518 | 757 | 4456 | 8207 | 0 | 0 |
| 1766777971 | 756 | 4477 | 8276 | 0 | 0 |
| 1766777175 | 754 | 4462 | 8200 | 0 | 0 |
| 1766776538 | 753 | 4468 | 8266 | 0 | 0 |
| 1766775597 | 751 | 4503 | 8200 | 0 | 0 |
| 1766774315 | 748 | 4482 | 8165 | 0 | 0 |
| 1766773426 | 746 | 4513 | 0 | 0 | 0 |
| 1766772232 | 740 | 4581 | 8222 | 0 | 0 |
| 1766771528 | 737 | 4539 | 8280 | 0 | 0 |
| 1766769239 | 724 | 4563 | 0 | 0 | 0 |
| 1766767411 | 711 | 4542 | 0 | 0 | 0 |
| 1766765925 | 691 | 4297 | 8226 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)