This is the latest recevied telemetry packets stored in our database for station/object F4HMY-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1766755658 | 24.7 C | 44.83 % | 1028.13 hPa | 0 | 0 |
| 1766755375 | 23.8 C | 42.59 % | 1024.25 hPa | 0 | 0 |
| 1766753419 | 24.3 C | 44.04 % | 1026.25 hPa | 0 | 0 |
| 1766752451 | 23.8 C | 44.79 % | 1027.88 hPa | 0 | 0 |
| 1766749423 | 23.4 C | 46.32 % | 1028.38 hPa | 0 | 0 |
| 1766747891 | 27.7 C | 26.51 % | 1026.5 hPa | 0 | 0 |
| 1766746960 | 20.3 C | 35.06 % | 1029.63 hPa | 0 | 0 |
| 1766746759 | 20.5 C | 33.37 % | 1028.13 hPa | 0 | 0 |
| 1766745883 | 21.2 C | 36.61 % | 1028.5 hPa | 0 | 0 |
| 1766744261 | 25.1 C | 49.57 % | 1027.63 hPa | 0 | 0 |
| 1766732538 | -1 C | 51.56 % | 1027.75 hPa | 0 | 0 |
| 1766714509 | -0.3 C | 52.39 % | 1029 hPa | 0 | 0 |
| 1766696478 | 1.4 C | 51.99 % | 1029 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)