This is the latest recevied telemetry packets stored in our database for station/object SQ1OHF-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765347825 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1765346925 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 1765346025 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1765345125 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1765344225 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 1765343324 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1765342424 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1765341524 | 4.01 VDC | 0 | 0 | 0 | 0 |
| 1765340624 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1765339724 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1765338824 | 4.01 VDC | 0 | 0 | 0 | 0 |
| 1765337924 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1765337023 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1765336123 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1765335223 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1765334323 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1765333423 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1765332523 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1765331623 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1765330722 | 4.01 VDC | 0 | 0 | 0 | 0 |
| 1765329822 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1765328922 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1765328022 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1765327122 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1765326222 | 4.03 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)