This is the latest recevied telemetry packets stored in our database for station/object KH6LOL-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765339426 | 13.33 Volts | 88.83 Deg.F | 0 | 0 | 0 |
| 1765338816 | 12.16 Volts | 86.19 Deg.F | 0 | 0 | 0 |
| 1765338517 | 11.98 Volts | 87.07 Deg.F | 0 | 0 | 0 |
| 1765338218 | 12.19 Volts | 87.07 Deg.F | 0 | 0 | 0 |
| 1765337918 | 12.16 Volts | 87.07 Deg.F | 0 | 0 | 0 |
| 1765337619 | 12.1 Volts | 86.19 Deg.F | 0 | 0 | 0 |
| 1765337320 | 12.16 Volts | 86.19 Deg.F | 0 | 0 | 0 |
| 1765337021 | 11.98 Volts | 86.19 Deg.F | 0 | 0 | 0 |
| 1765336722 | 12.25 Volts | 86.19 Deg.F | 0 | 0 | 0 |
| 1765336423 | 12.25 Volts | 86.19 Deg.F | 0 | 0 | 0 |
| 1765336124 | 12.25 Volts | 86.19 Deg.F | 0 | 0 | 0 |
| 1765335825 | 12.28 Volts | 86.19 Deg.F | 0 | 0 | 0 |
| 1765335526 | 12.28 Volts | 86.19 Deg.F | 0 | 0 | 0 |
| 1765335227 | 12.28 Volts | 86.19 Deg.F | 0 | 0 | 0 |
| 1765334928 | 12.25 Volts | 87.95 Deg.F | 0 | 0 | 0 |
| 1765334629 | 12.16 Volts | 89.71 Deg.F | 0 | 0 | 0 |
| 1765334329 | 13.01 Volts | 90.58 Deg.F | 0 | 0 | 0 |
| 1765334314 | 12.98 Volts | 90.58 Deg.F | 0 | 0 | 0 |
| 1765334179 | 12.95 Volts | 89.71 Deg.F | 0 | 0 | 0 |
| 1765334152 | 13.01 Volts | 89.71 Deg.F | 0 | 0 | 0 |
| 1765334134 | 13.01 Volts | 89.71 Deg.F | 0 | 0 | 0 |
| 1765333974 | 13.01 Volts | 87.95 Deg.F | 0 | 0 | 0 |
| 1765333952 | 12.98 Volts | 87.95 Deg.F | 0 | 0 | 0 |
| 1765333930 | 13.01 Volts | 87.95 Deg.F | 0 | 0 | 0 |
| 1765333854 | 12.98 Volts | 87.95 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0
Temp: 0, 0.879, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)