This is the latest recevied telemetry packets stored in our database for station/object SQ8XY-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765351717 | 52 Count | 18 Count | 18 Count | 0 VDC | 0 VDC |
| 1765349914 | 51 Count | 18 Count | 18 Count | 0 VDC | 0 VDC |
| 1765348113 | 50 Count | 18 Count | 18 Count | 0 VDC | 0 VDC |
| 1765346321 | 49 Count | 18 Count | 18 Count | 0 VDC | 0 VDC |
| 1765344520 | 34 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1765342719 | 33 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1765340919 | 32 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1765339118 | 31 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1765337317 | 30 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1765335517 | 29 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1765333716 | 28 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1765331915 | 27 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1765330114 | 26 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1765328313 | 25 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1765326513 | 24 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1765324767 | 23 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1765322967 | 22 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1765321165 | 21 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1765319365 | 20 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1765317564 | 15 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765315763 | 14 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765313962 | 13 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765312162 | 12 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765310361 | 11 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1765308560 | 10 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)