This is the latest recevied telemetry packets stored in our database for station/object CT7BAF-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1768192096 | 124 Count | 0 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1768190293 | 123 Count | 0 Count | 0 Count | 4.02 VDC | 0.14 VDC |
| 1768188490 | 122 Count | 0 Count | 0 Count | 4.02 VDC | 0.14 VDC |
| 1768186687 | 121 Count | 0 Count | 0 Count | 4.03 VDC | 0.14 VDC |
| 1768184885 | 120 Count | 0 Count | 0 Count | 4.01 VDC | 0.14 VDC |
| 1768183117 | 119 Count | 0 Count | 0 Count | 4.02 VDC | 0.14 VDC |
| 1768181313 | 118 Count | 0 Count | 0 Count | 3.98 VDC | 0.14 VDC |
| 1768179510 | 117 Count | 0 Count | 0 Count | 4.01 VDC | 0.14 VDC |
| 1768177707 | 116 Count | 0 Count | 0 Count | 3.99 VDC | 0.14 VDC |
| 1768175904 | 115 Count | 0 Count | 0 Count | 3.97 VDC | 0.14 VDC |
| 1768174101 | 114 Count | 0 Count | 0 Count | 4.03 VDC | 0.14 VDC |
| 1768172298 | 113 Count | 0 Count | 0 Count | 4.03 VDC | 0.14 VDC |
| 1768170495 | 112 Count | 0 Count | 0 Count | 4.04 VDC | 0.14 VDC |
| 1768168692 | 111 Count | 0 Count | 0 Count | 4.02 VDC | 0.14 VDC |
| 1768166889 | 110 Count | 0 Count | 0 Count | 4.02 VDC | 0.14 VDC |
| 1768165086 | 109 Count | 0 Count | 0 Count | 4.03 VDC | 0.14 VDC |
| 1768163283 | 108 Count | 0 Count | 0 Count | 3.99 VDC | 0.14 VDC |
| 1768161515 | 107 Count | 0 Count | 0 Count | 3.99 VDC | 0.14 VDC |
| 1768159712 | 106 Count | 0 Count | 0 Count | 4.02 VDC | 0.14 VDC |
| 1768157909 | 105 Count | 0 Count | 0 Count | 4.01 VDC | 0.14 VDC |
| 1768156106 | 104 Count | 0 Count | 0 Count | 4.03 VDC | 0.14 VDC |
| 1768154303 | 103 Count | 0 Count | 0 Count | 3.97 VDC | 0.14 VDC |
| 1768152500 | 102 Count | 0 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1768150697 | 101 Count | 0 Count | 0 Count | 3.98 VDC | 0.14 VDC |
| 1768148894 | 100 Count | 0 Count | 0 Count | 3.99 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)