This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | DC* | PC Board* | CPU* | Ambient* | Value5* |
|---|---|---|---|---|---|
| 1766224630 | 1372 | 79.5 | 45.6 | 60.8 | 65 |
| 1766223995 | 1372 | 79.6 | 45.1 | 60.9 | 67 |
| 1766223430 | 1372 | 79.6 | 45.6 | 60.8 | 66 |
| 1766222794 | 1375 | 79.6 | 45.1 | 60.9 | 65 |
| 1766222231 | 1372 | 79.5 | 45.1 | 60.9 | 65 |
| 1766221595 | 1369 | 79.6 | 46.2 | 60.8 | 66 |
| 1766221029 | 1372 | 79.6 | 45.6 | 60.9 | 65 |
| 1766220395 | 1372 | 79.6 | 45.6 | 60.9 | 65 |
| 1766219830 | 1372 | 79.7 | 45.1 | 60.9 | 65 |
| 1766219195 | 1374 | 79.6 | 45.6 | 60.9 | 65 |
| 1766218631 | 1371 | 79.7 | 45.1 | 60.9 | 66 |
| 1766217995 | 1372 | 79.6 | 45.6 | 60.9 | 65 |
| 1766217430 | 1372 | 79.6 | 45.6 | 60.9 | 65 |
| 1766216795 | 1372 | 79.6 | 45.6 | 60.8 | 65 |
| 1766216231 | 1371 | 79.6 | 45.6 | 60.9 | 65 |
| 1766215595 | 1372 | 79.6 | 45.6 | 60.9 | 65 |
| 1766215031 | 1374 | 79.7 | 46.2 | 61 | 65 |
| 1766214395 | 1372 | 79.8 | 45.1 | 61 | 66 |
| 1766213830 | 1374 | 79.7 | 45.6 | 61 | 65 |
| 1766213195 | 1372 | 79.7 | 45.1 | 61 | 66 |
| 1766212630 | 1371 | 79.8 | 45.6 | 61 | 65 |
| 1766211995 | 1378 | 79.8 | 45.6 | 61 | 65 |
| 1766211431 | 1377 | 79.7 | 46.2 | 61 | 65 |
| 1766210795 | 1367 | 79.8 | 46.2 | 61 | 65 |
| 1766210229 | 1372 | 79.7 | 46.2 | 61 | 66 |
*Used Equation Coefficients:
DC: 0, 1, 1000
PC Board: 0, 0.1, 0
CPU: 0, 0.1, 0
Ambient: 0, 0.1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)