This is the latest recevied telemetry packets stored in our database for station/object W4KEL-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765358718 | 13.42 | 10.47 | 0 | 0 | 0 |
| 1765356678 | 13.39 | 10.47 | 0 | 0 | 0 |
| 1765354637 | 13.42 | 10.47 | 0 | 0 | 0 |
| 1765352597 | 13.42 | 10.47 | 0 | 0 | 0 |
| 1765350557 | 13.39 | 10.47 | 0 | 0 | 0 |
| 1765348516 | 13.45 | 10.47 | 0 | 0 | 0 |
| 1765346476 | 13.39 | 10.47 | 0 | 0 | 0 |
| 1765344435 | 13.42 | 10.47 | 0 | 0 | 0 |
| 1765340355 | 13.42 | 10.47 | 0 | 0 | 0 |
| 1765338315 | 13.45 | 10.47 | 0 | 0 | 0 |
| 1765336273 | 13.45 | 9.98 | 0 | 0 | 0 |
| 1765334232 | 13.42 | 10.47 | 0 | 0 | 0 |
| 1765332192 | 13.42 | 10.47 | 0 | 0 | 0 |
| 1765330152 | 13.42 | 10.47 | 0 | 0 | 0 |
| 1765328112 | 13.42 | 10.47 | 0 | 0 | 0 |
| 1765326071 | 13.42 | 9.98 | 0 | 0 | 0 |
| 1765324031 | 13.39 | 10.47 | 0 | 0 | 0 |
| 1765321991 | 13.39 | 10.47 | 0 | 0 | 0 |
| 1765319951 | 13.39 | 10.47 | 0 | 0 | 0 |
| 1765317911 | 13.42 | 10.47 | 0 | 0 | 0 |
| 1765315870 | 13.42 | 10.47 | 0 | 0 | 0 |
| 1765313830 | 13.39 | 10.47 | 0 | 0 | 0 |
| 1765311789 | 13.42 | 9.98 | 0 | 0 | 0 |
| 1765309749 | 13.42 | 10.47 | 0 | 0 | 0 |
| 1765307709 | 13.42 | 10.47 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.489, -273.15
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)