This is the latest recevied telemetry packets stored in our database for station/object CE3TDM-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1765594934 | 4.15 VDC | 26.9 C | 42.76 % | 1022.75 hPa | 0 |
| 1765593127 | 4.13 VDC | 27.3 C | 42.15 % | 1024 hPa | 0 |
| 1765592223 | 4.11 VDC | 27.3 C | 42.33 % | 1023.75 hPa | 0 |
| 1765589511 | 4.07 VDC | 27.6 C | 41.9 % | 1022.25 hPa | 0 |
| 1765586798 | 4.04 VDC | 28.2 C | 41.46 % | 1020.25 hPa | 0 |
| 1765584990 | 4.01 VDC | 28.6 C | 41 % | 1020.88 hPa | 0 |
| 1765583183 | 3.99 VDC | 29 C | 41.09 % | 1021.13 hPa | 0 |
| 1765580470 | 3.96 VDC | 29.3 C | 40.89 % | 1020.75 hPa | 0 |
| 1765579566 | 3.95 VDC | 29.4 C | 40.96 % | 1021.38 hPa | 0 |
| 1765577759 | 3.92 VDC | 29.3 C | 40.73 % | 1021.75 hPa | 0 |
| 1765575950 | 3.9 VDC | 29.5 C | 40.16 % | 1018.13 hPa | 0 |
| 1765574143 | 3.88 VDC | 29.5 C | 39.22 % | 1018.75 hPa | 0 |
| 1765572334 | 3.84 VDC | 29.3 C | 40.11 % | 1021 hPa | 0 |
| 1765571430 | 3.83 VDC | 29.2 C | 41.36 % | 1021 hPa | 0 |
| 1765570526 | 3.81 VDC | 29.3 C | 42.1 % | 1019.63 hPa | 0 |
| 1765568718 | 3.79 VDC | 29.1 C | 42.48 % | 1020.75 hPa | 0 |
| 1765565103 | 3.75 VDC | 28.3 C | 45.79 % | 1019.63 hPa | 0 |
| 1765565031 | 3.75 VDC | 28.3 C | 45.83 % | 1019.25 hPa | 0 |
| 1765560829 | 3.68 VDC | 26.4 C | 52.3 % | 1021.13 hPa | 0 |
| 1765557212 | 3.68 VDC | 25.4 C | 55.88 % | 1022.63 hPa | 0 |
| 1765556309 | 3.68 VDC | 24.9 C | 56.74 % | 1021.63 hPa | 0 |
| 1765555405 | 3.68 VDC | 24.4 C | 58.67 % | 1021.75 hPa | 0 |
| 1765554501 | 3.67 VDC | 23.4 C | 60.79 % | 1023.13 hPa | 0 |
| 1765553578 | 3.68 VDC | 22 C | 64.35 % | 920.75 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)